The main function of a Threaded Flange lies in its quality of joining two pipes together without any need for welding. Threaded flanges manufactured by us are of high quality and ideal for higher pressure applications.

Blind Flanges

Blind flange is a kind of bore-less flange which is generally used to seal the end of a pipe or a vessel opening. This flange also allows easy access to piping systems (for inspection, etc.) after they are closed. We manufacture a multitude of such flanges.

Slip on Flanges

Slip-on flange has a bore that is slightly larger in size than the matching pipe's outer diameter. Once the pipe enters the flange it is welded both inside and outside for creating a leak-proof bond. Our slip-on flanges are heavy-duty and quality-tested.

DIN Flanges

The DIN flange is a sturdy, economical, and reliable type of flange. It is widely used in industries like engineering, construction, power generation, and so as. We offer these flanges in multiple dimensions which are in accordance with the international standards.

Socket Welding Flanges

Socket welding or socket weld flange is quite similar to the slip-on flange in look. The only difference is that the counter boar of socket weld flange is slightly larger in diameter than the outer diameter of the pipe to be fitted with it. We make quality socket welding flanges.

Pipe Elbow fittings is a very important pipe fitting. When we talk about a pipe elbow, it means a length of pipe with a sharp bend in it. Pipe elbows are fitting accessories which are used widely in various industrial sectors in pipe fitting. A pipe elbow is frequently used in pressurized applications and are available in various shapes and sizes for use in different applications. A pipe elbow is a fitting installed between two lengths of pipe or tube allowing a change of direction, usually in the 90° or 45° direction.

Pipe couplings are highly demanded in the pipe fitting market. Pipe couplings are fittings that help to extend or terminate pipe runs. These fittings are also used to change pipe size. Couplings extend a run by joining two lengths of pipe. They are known as reduced coupling if they are used to connect pipes of different sizes.

Pipe Nipple is a length of straight pipe with male threads on both ends. It is one of the most popular category of pipe fittings. It is a connector or a coupling threaded on both ends. Pipe nipples are used to allow plumbing to be connected to a water heater or other plumbing. They are used to fit straight end hose or pipe. A combination of pipe nipples are recommended for low-pressure discharge and suction service for various compatible liquids and not for compressible products like air, nitrogen or steam.

Pipe Plugs are defined as cap end of fractional tubes used in a large number of industries. These pipe plugs are designed to insert into the end of tubing to dead-end the flow. Various materials are used to manufacture high quality tube plugs in a variety of end connections.

Pipe Reducer are tube fittings that are widely used in a number of industries in order to providing greatest connection flexibility in connecting fractional tubes in various installations. Pipe reducer is a kind of pipe fitting that joins two pipes of different diameter. The pipe reducers are available in a range of materials depending on the end use of the products and these fittings are manufactured in inch and metric size.

Pipe Union is a type of fitting equipment designed in such a way to unite two pipes which can be detached without causing any deformation to the pipes. Any kind of small diameter piping connections requiring a positive seal and easy assembly as well as disassembly are made with the help of pipe union. In other words, the pipe unions can disjoint two pipes very easily. They are widely demanded in the pipe fitting market.

Pipe Tee is a type of pipe fitting which is T-shaped having two outlets, at 90° to the connection to the main line. It is a short piece of pipe with a lateral outlet. Pipe Tee is used to connect pipelines with a pipe at a right angle with the line. Pipe Tees are widely used as pipe fittings. They are made of various materials and available in various sizes and finishes. Pipe tees are extensively used in pipeline networks to transport two-phase fluid mixtures.

Pipe sleeve is a popular kind of pipe fitting used in various industrial applications. It is available in various sizes, materials depending on the applications in which they are applied. Sleeves are used for variety of purposes and hence widely demanded in the pipe fitting market. Pipe sleeves are user friendly to all users and specifiers like architects, mechanical and electrical engineers, network installers, designers, consultants, builders and plumbers everywhere.

Pipe Ferrule is a type of pipe fitting made of various materials used especially for joining or binding one part to another (as pipe sections). A pipe ferrule consists of a circular clamp which is used to hold together and attach fibers, wires or posts. A pipe ferrule is also known as a circular fitting device that is used to hold the pipes together.

Standards Followed
 

Head Types:

Threads Available:

Flexible Metallic Hoses

We offer a wide range of double interlock and squre lock Flexible Hose Pipes that are fabricated by spirally winding a preformed metal strip over a mandrel. These can be sullpied wth packing or without packing as per the requirements of our valued clients that are spread across the world. Our range is available in different sizes, lengths and end fitting configurations. These are manufacturered in GI & satainless steels.

Following are the salient features of our range:

• Durable
• Flexible
• High tensile strength

Corrugated Metallic Hoses

We are engaged in offering an assortment of corrugated hose pipes that are manufactured by using high grade raw material suh as SS 304,316,316L & 321. Our range is widely applicable for conveying liquids and gases as per the demand of market. These comprise of a metal wire braid that provides higher-pressure capability to the assembly. These are manufactured on the basis of pressure, temperature, media, flexing requirements & environment .

Have the following benefits:

• High strength
• Resistance to temperature
• Anti corrosive
• Capable of absorbing vibrations and noise
• Connects misaligned rigid piping, moving parts of machinery or equipment
• Practical for hooking up frequently moved or dismantled equipment

Besides this, following are the specifications of our range:

• Available in sizes that ranges from 1/4" I.D. (inside diameter) to 12" I.D
• Available in 3 series of stainless steel and bronze

Expansion Bellows

We are occupied in offering a wide range of expansion bellows that are manufactured to provide better security & variety. Our range is extensively applicable for absorbing the movement in pipes that are caused because of the thermal expansion.  These are fabricated by using annealed type 321 stainless steel sheet stock that is rolled into a tube and seam welded. Besides this, titanium and 316 stainless steel are also used to fabricate our range as per the client’s requirements.

Usage of our range is as follows:

• Diesel generator exhuast and boiler fuel
• High and low-pressure turbine piping
• Main feed pump suction
• Propeller shaft air system
• Condensate pump suction